Strip Paint & Coatings — Without Damaging What’s Underneath
Mobile laser paint removal for Vancouver, WA & Portland, OR. We strip old paint, primer, rust-preventive coatings and powder coat down to a clean substrate — no chemical strippers, no media blasting, no warped panels.
Real BEAMJi job: car bumper — before and after laser paint/coating removal.
Selective Paint Removal — Layer by Layer
Chemical paint strippers are messy, hazardous, and often attack the substrate along with the coating. Sandblasting is faster but aggressive enough to warp thin panels, round off sharp edges, and leave a textured “blasted” surface that needs extra prep before repainting. Laser paint removal ablates coatings layer by layer with a focused beam — stopping automatically once it hits bare metal, wood, or stone. No solvents, no dust clouds, no secondary waste to dispose of, and the surface underneath stays smooth and ready for the next coat.
Automotive Paint & Primer
Strip body panels and parts down to bare metal for restoration, rust repair, or repainting — without warping thin sheet metal.
Industrial Coatings & Powder Coat
Remove old powder coat, epoxy, or protective coatings from equipment and machinery before recoating.
Old Paint on Wood & Trim
Lift lead paint and old finishes from wood surfaces, trim, and historic millwork without scorching or gouging.
Marine & Equipment Coatings
Strip antifouling paint, marine coatings, and rust-preventive layers from hulls, trailers, and outdoor equipment.
Pre-Weld Coating Removal
Clean paint and coatings from weld areas to prevent contamination and porosity in the weld.
Selective Layer Removal
Remove a top coat while preserving a primer or base layer underneath — precise control over how deep the laser goes.
Laser vs Sandblasting & Chemical Stripping
Here’s how laser paint removal compares to the methods most shops still rely on.
| Laser Paint Removal | Sandblasting / Chemical Stripper |
|---|---|
| No solvents, no hazardous waste disposal | Chemical strippers require careful disposal & ventilation |
| Stops at bare substrate — won’t gouge metal or wood | Media blasting can round edges & remove base material |
| No abrasive dust — clean for indoor use | Creates large amounts of dust and media cleanup |
| Can target a single layer and stop there | Hard to control depth — often removes everything |
| Mobile — done on-site at your location | Usually requires a blast booth or dip tank |
Frequently Asked Questions
Will laser paint removal damage metal, wood, or stone underneath?
No. The laser is calibrated to remove the coating and stop once it reaches the substrate. Because paint and metal (or wood) absorb laser energy very differently, the process is self-limiting and won’t gouge or scorch the base material when done correctly.
Can you remove multiple layers of paint?
Yes. Multiple coats — including primer, base coat, and clear coat — can be removed in successive passes. We can also stop at a specific layer if you want to preserve a primer or base coat.
Is laser paint removal safe for lead-based paint?
Laser ablation vaporizes the coating with minimal airborne dust compared to sanding or grinding, but proper containment and respiratory protection are still used when working with lead-based paints, per safety guidelines.
How does pricing work for paint removal jobs?
Pricing depends on surface area, number of coating layers, and material type. Send us photos and details for a free, no-obligation estimate.
Do you travel to job sites for paint removal?
Yes — we’re a fully mobile service covering Vancouver, WA, Portland, OR, and surrounding communities. Our equipment travels to your location.
Ready to Strip It Down the Clean Way?
Send us a few photos and get a free, no-obligation estimate today.